Perfluoro(2-methyl-3-pentanone),Colorless and tasteless under normal temperature, transparent liquid, easy to vaporize. Flash point 9.1 ℃, saturated Other Density 0.0136g / cm3, 25 ℃ 1atm, specific volume 0.0733m³ / kg, 25 ℃ 1atm, viscosity 0 ℃ / 25 ℃ 0.56 / 0.39 MPa s, melting point -108 ° C, boiling point 49 ° C , Vapor pressure 25 ℃ 5.85Pa, density 1,6 g / cm3, 25 ℃, dielectric strength 2.3; 1atm (N2 = 1.0)
Perfluoro(2-methyl-3-pentanone) is an important alternative to halon fire extinguishing agents. It is a fluorinated ketone compound that is supercharged with nitrogen and stored in a high pressure gas cylinder as part of a fire suppression system.
Over the years, we have built very good long-term cooperation relation with many well-known chemical customer from South America, North America, Europe and Asia market, and get their highly satisfactory.
Product Name: | Perfluoro(2-methyl-3-pentanone) |
CAS NO: | 756-13-8 |
Assay: | >99% |
Appearance: | It is a clear, colorless, tasteless liquid |
Molecular Formula: | C6F12O |
Molecular Weight: | 316.04 |
Export Packing: | 250 kg/ drum, 1250 kg/IBC |
Application: | Fluorine fine products; Fine chemicals; Fluorine meticulous; Fire extinguishing agent; cleaner |
In the fire extinguishing agent: Perfluoro(2-methyl-3-pentanone) is a liquid at normal temperature. Since its heat of vaporization is only 1/25 of that of water and its vapor pressure is 25 times that of water, these properties make it easy to vaporize and exist in the gaseous state, and the effect of extinguishing fire mainly depends on the heat absorption . In the protection of the environment, it is a veritable green fire-fighting agent. Fire extinguishing concentration of 4-6%, safety margin is relatively high, when used on the human body safer. | ![]() |
In cleaning agents: Perfluoro(2-methyl-3-pentanone) is useful as a wet cleaner for steam reactor and vapor reactor components as well as for cleaning unwanted deposits accumulated in gas phase reactors, for etching dielectric or metallic materials in gas phase reactors, and for use in gas phase reactors Doping of various materials. |
Solvent aspect: Perfluoropolyether lubricants can be applied as a coating to the substrate such as magnetic media, the coating is dried, the substrate surface covered with a thin and even lubricating film. Perfluoro(2-methyl-3-pentanone) dissolves various perfluoropolyether compounds. | ![]() |